A range of new products have been introduced to the market by Aeroflow

Since 2010, Aeroflow Performance Products has grown to design and manufacture close to 13,000 quality products. Amongst the latest releases are the following products.

Engine Storage Bags
Protect engines when they are on the stand being worked on with the Aeroflow Performance engine storage bag.
These heavy-duty clear bags are designed to last and protect the engine from dust, debris and moisture.
The engine bag is big enough to accommodate most engines and can even fit over most engine stands and engine dyno stands. The bag measures 1200mm High x 1400mm Wide.

Flexplate Bolts
When installing a new flexplate, Aeroflow says it is recommended to replace your flexplate bolts as the old factory ones can fatigue over time.
Aeroflow flexplate bolts are made from chrome moly 8740 for high strength compatibilities.
They are black oxide to resist rust and corrosion and Aeroflow recommends the use of Loctite 262 or similar so they won’t come loose over time. These bolts should be torqued down to each manufacturer’s specifications.

Oil Pan Bolt Kits
Aeroflow Performance’s oil pan bolt kits are designed to hold and secure the oil pan and gasket in place without the worry of loosening.
It says these oil pan bolts are the most professional method of attaching an oil pan to an engine block.
The bolts’ construction is such that they can be re-used time and time again and provide prolonged gasket life.
These oil pan bolts are manufactured from aircraft quality 8740 high tensile strength chromoly steel and cold-forged to ensure molecular integrity within the stud.
All bolts feature a small 12-point head and hardened washers for an even load distribution and accurate torque readings.

Nissan SR20 VCT and IACV Block Off Plates
The Aeroflow SR20 VCT and IACV block off plates are designed to delete the vehicle Idle air control valve and the underside waterpipe.
Aeroflow says this is great for those that are doing an aftermarket drive by wire throttle body conversion or remote mounted Idle air control valve units.
They are made from billet 6061 aluminium and anodised black. New M6 button head bolts and M6 spring washers are included in this kit for mounting.

Engine Mounts to suit Holden Commodore VB-VH, VK-VL, VN-VS V8
Aeroflow Performance says these engine mounts are designed as a direct bolt up for conversion cars and also OEM replacement with no extra adapters required.
Due to excessive movement, Aeroflow says the factory OE engine mounts are prone to failure or just everyday wear and tear.
The black polyurethane bushes and high-quality steel mounts isolates the engine from the chassis, resulting in vibration suppression and allowing the power to get to the ground where it is needed.
Aeroflow explains the two-piece bolt together design of these engine mounts allow the end user to split the two halves for ease of removal or installation of the engine to the chassis.
These mounts suit Holden Commodore VB-VH, VK-VL, VN-VS with 253-308 and 5.0L EFI V8.

For more information, visit www.aeroflowperformance.com