A range of new products have been introduced to the market by Aeroflow

Since 2010, Aeroflow Performance Products has grown to design and manufacture close to 13,000 quality products. Amongst the latest releases are the following products.

Delphi Fuel Pump Plug and Pins
Aeroflow Performance says its Delphi two-pin plug and pins are a great solution when installing a 40mm fuel pump into your fuel tank.
This plug will suit the Aeroflow Performance 450LPH (AF49-1042) and 525LPH (AF49-1057) fuel pumps as well as aftermarket 40mm diameter fuel pumps such as Walbro.
It comes with butyronitrile seals which are great for all fuel types and terminals ready to wire up your fuel pump.

Magnetic Pick-Up Harness
This Aeroflow replacement harness is specifically designed to connect to an aftermarket digital ignition controller or MSD ignition boxes to your distributor or crank trigger.
This harness is sold separately for those that have a worn out or burned out cable. It is a two-pin cable which has a total length of 72” (1830mm).

Quick Release Pins
These T-handled quick release pins are a fastener connecting piece designed for quick locking, and fixing, which can lock and unlock components quickly and easily.
Press the button on the handle to retract the steel ball on the head of the pin body, then pass the quick-release pin through the hole. The Pins will not release until the button on the handle is depressed.
Made from durable zinc coated steel, Aeroflow Performance says all these pins have high hardness, no rust, wear resistance, and long service life.
The T-handle is CNC alloy and anodised in black with various lengths and diameters to suit different applications.

Tyre Gauge
Maintaining the correct tyre pressure is essential for maintaining tyre performance and tyre life.
Aeroflow says its analogue tyre pressure gauge does that with great accuracy of two percent, stating this ensures a precise readout every time its required.
It features a large 63mm dial face ranging from 0 to 60 psi in increments of one psi. An isolation boot is fitted to the dial face for a good grip as well as protection.
The 350mm long hose is attached with the angled chuck to reach into the wheel itself, with a mechanical release valve to ensure you get the right pressure.

Engine Dipstick to suit Holden V8
These engine dipsticks are a chrome-plated steel tube and dipstick replacement for Holden Commodore VB to VT with 253, 304, 305, and 308 engines with front sump configuration.
The dipstick markings match the factory specifications for true accuracy. Aeroflow Performance says they are easy to install with no special tools or skills required and will suit Aeroflow’s AF82-2102 super oil pan.

Fuel Cell Breather Kit
Aeroflow Performance says it takes the guess work out of plumbing up a fuel cell breather/roll over with this universal kit.
The kit has been designed to suit the Aeroflow range of fuel cells or any aftermarket fuel cell with a female -12ORB fitting in the fuel cell.
Aeroflow says this breather setup is vital when installing a fuel cell into your vehicle. It allows air to escape as the fuel cell is filled and permits filtered air to enter when fuel is getting consumed.
This allows the tank to breath to avoid pressurisation during normal operation.
This universal kit includes two meters of 100 series braided line with two straight 150 series taper fittings.
Aeroflow Performance says its unique roll valve over fitting and -8AN adapter fitting screws into the fuel cell itself, while a straight -8AN bulkhead with nut and Teflon washers allow you to mount the stainless-steel filter element outside the vehicles cabin to avoid flumes within it.
All fittings and hose are black hard anodised for a stealth look.

For more information, visit www.aeroflowperformance.com