NEW FROM AEROFLOW
A range of new products have been introduced to the market by Aeroflow
![](https://www.aftermarket.com.au/wp-content/uploads/2024/07/aeroflow-2-prtc-july24-1024x423.jpg)
Since 2010, Aeroflow Performance Products has grown to design and manufacture close to 13,000 quality products. Amongst the latest releases are the following products.
Stainless Steel Turbo Manifold to suit Nissan SR20
Aeroflow Performance steampipe turbo manifolds are a series of pipes that collect exiting exhaust gases which can be channelled into Aeroflow’s merge collector which is perfectly matched to its Boosted range of turbochargers.
The merge collector design allows all pipes to enter at the exact same angle, and merge together at a point in the middle, pointing straight into the turbine.
No pipes enter across each other, so airflow is not disrupted, meaning a perfect balance between boost control and flow. With minimal back pressure where the manifold meets the turbo, Aeroflow says you can be sure that you’re getting the best flow possible from its turbo manifold.
Further, Aeroflow says its turbo manifolds are finished to the highest of standards, constructed from thick wall 3mm mandrel bent stainless steel steam pipe with CNC Machined header and turbo flanges.
Each flange is milled after welding to ensure precise surface finish. These manifolds are supplied with a short wastegate starter pipe designed to allow the fabricator to choose the size of the wastegate required, and the position the wastegate sits in.
Stainless Steel Header Flanges
Aeroflow CNC header flanges are manufactured from 9.5mm (3/8”) thick stainless steel.
They are precision-cut to meet your ports, reduce warping, and prevent leaks.
The Aeroflow header flanges are offered in a variety of header flange sizes and shapes to mate your cylinder heads and headers/manifolds to meet your exhaust building needs.
![](https://www.aftermarket.com.au/wp-content/uploads/2024/07/aeroflow-1-prtc-july24-1024x522.jpg)
Pro Street Aluminium Race Seats
Aeroflow pro street aluminium racing seats are a lightweight seat option that provides added strength and safety for your race car.
They are constructed from 2.5mm thick 5052 grade aluminium with offset rolled extrusion around the entire seat and reinforced head rest.
The strategically positioned contours on the exterior are TIG-welded while the inside is MIG welded which results in improved structural rigidity and a more comfortable ride.
Each seat features moulded rubber guards around double shoulder belt openings and lower belt openings to accommodate most racing harnesses, as well as snap fasteners around the seat for a cover to clip onto.
These race seats are offered in a range of hip sizes from 15” up to 20” with the 18.5” and 20” with longer bottoms, belt openings moved forward, side bolsters, and raised rear belt openings to accommodate larger drivers. The option for both a raw alloy finish and black finish are available with a cover and seat mounts sold separately.
For more information, visit www.aeroflowperformance.com