Roadsafe offers an innovative control arm range for every application

Roadsafe is a leading Australian supplier of steering, suspension, and chassis parts for the automotive aftermarket, stating it “has been leading the way in parts excellence for over 40 years.”
The company says its dedication to safety and quality is underpinned by the extensive research and testing undertaken by the Roadsafe Research and Development (R&D) department based in Melbourne.
Roadsafe states it has the experts, the testing technology and the facilities to ensure the delivery of highly innovative automotive steering and suspension components that not only meet, but often surpass OE (Original Equipment) specifications to the Australian automotive aftermarket.
“Roadsafe prides itself on having an industry leading range of control arm applications suitable for a wide range of applications,” Roadsafe Research and Development Manager, Troy Schipper, said.
The Roadsafe range offers more than 1,200 catalogued replacement Control Arm part numbers, covering thousands of known vehicle applications for upper arms, lower arms, radius arms and strut rods across both front and rear replacement applications.
“Roadsafe replacement control arms ensure that general automotive technicians and suspension specialists are fitting a completely brand new, OE quality specified control arm as a bolt in replacement with no pressing required,” Troy said.
“The use of Roadsafe replacement control arms reduces suspension component fitment issues, by eliminating the process of fitting new parts into unknown worn components, saving workshop labour time and money.
“For off-road and 4×4 enthusiasts, the Blackhawk4x4 upper control arms range harnesses Roadsafe’s four decades of experience in designing and supplying steering and suspension products.”
Blackhawk4x4 upper control arms are designed to address a critical concern for vehicles with raised suspension – the disruption of factory-set steering geometry.
“This disruption can lead to a host of problems, including premature tyre wear, bump steer, poor handling, and a loss of driver confidence,” Troy said.
“The Blackhawk4x4 range of upper control arms, designed by in house industry experts and employing modern manufacturing techniques, aim to rectify these issues.”

Blackhawk upper control arms provide an average of three degrees of increased caster correction over OE, ensuring a balanced and precise steering experience.
“Furthermore, they seamlessly adjust camber to meet OE specifications, maintaining the vehicle’s stability,” Troy said.
“The Blackhawk4x4 upper control arms also offer clearance for larger aftermarket wheels and tyres, ensuring the vehicle looks and performs its best.
“With a fixed position ball joint, Blackhawk4x4 upper control arms eliminate issues commonly associated with adjustable ball joints, enhancing reliability.”
In terms of durability, Troy says Blackhawk4x4 has gone the extra mile.
“These components are manufactured from 300mpa carbon steel, providing increased strength compared to OE designs,” Troy said.
“The heavy-duty, high articulation ball joints ensure robust performance, while features like the anodised black dust cap and sandblasted, E-coated, and powder-coated finish guarantee ultimate durability and corrosion resistance.
“Moreover, they comply with ADR and VSB14 standards, ensuring that they meet all necessary safety requirements.”
The newly released Blackhawk4x4 Ultimate adjustable upper control arms reportedly represent a “game-changing” advancement in the world of 4×4 suspension components.
“With a focus on innovation, these control arms introduce a level of adjustment and serviceability that was previously unheard of in this segment,” Troy said.
“A proprietary ball joint offers an unprecedented degree of articulation, thereby supporting any increase in suspension travel.
“What sets the Blackhawk4x4 Ultimate design apart is its accessibility; anyone, from a seasoned mechanic to a 4×4 enthusiast, can easily disassemble, service, or rebuild the ball joint using basic hand tools.
“Moreover, the patented on-vehicle, all steel thread adjustment capability with built-in caster increase opens a world of possibilities for precise camber and caster corrections, ensuring optimal wheel alignments and positioning.
“Crafted from a forged aluminium 6082 mainframe, these control arms combine strength that surpasses OEM standards with maintenance-free rubber inner bushings and durable coatings, built to endure even the most challenging driving conditions.
“The nitride-hardened threaded adjustment mechanism guarantees longevity and corrosion resistance. Additionally, the inclusion of double mechanical 4140 chromoly locking nuts and state-of-the-art manufacturing processes make the Blackhawk4x4 Ultimate adjustable upper control arms the go-to choice for dedicated 4×4 owners and off-road enthusiasts.”
Importantly, Blackhawk4x4 Ultimates are NCOP/ADR compliant for street legal use when installed by an accredited professional with engineer sign-off and certification.
“Rigorous product testing, from Finite Element Analysis to physical tests of the adjustment mechanism, has validated their engineering excellence,” Troy said.
“Furthermore, they’ve undergone numerous physical tests including a physical skid load, torsion and vibration studies alongside stringent local quality assurance measures, and are covered by a comprehensive warranty, providing peace of mind to those seeking the utmost in suspension performance.”

For more information about the Roadsafe and Blackhawk product range, call 03 8687 1700 or visit www.roadsafe.com.au or www.blackhawk4x4.com